-english-
Here is a short tutorial on how to order custom stickers without anything going wrong.
First, select the material you want for your sticker under “Material.”
You can choose between:
- Vinyl paper glitter (glitter vinyl paper with a glittery finish)
- Vinyl paper glossy (glitter vinyl paper with a glossy finish)
- Vinyl paper matte (a matte vinyl paper)
- Sticker paper (this is the paper on which the sticker sheets are printed)
For this example, I have chosen a glossy vinyl sticker and therefore select "Vinyl paper glossy":
Next, you need to find out which sticker sheet your design is on. I have decided that I would like something from the Cafe_01 sticker sheet:
I therefore enter the name "Cafe_01" in the "Sticker Sheet" field:
My sticker should be the top left cup. Therefore, please provide as detailed a description as possible so that I can identify the sticker. Since there are several cups on the sticker sheet, I will choose “Cup top left” as the motif to make it easier to distinguish between them.
Next, you need to enter the size. This refers to the largest dimension of the sticker. This means that if a sticker is wider than it is tall, the size is the width. If it is taller than it is wide, then the size refers to the height. Here are two examples:
As you can see, the border does not count towards the size either. In my example with the cup, the width is greater than the height. I want my cup to be 5 cm wide, so I select the size "5.0 cm" under "Size":
The last step is to choose the width of the border. Keep in mind that smaller stickers look better with a small border, while larger stickers look better with a larger border. For my example sticker, a 2.5mm border looks very good. Therefore, I select “Border width” as “2.5mm”.
My motif will therefore be 5.0cm + 2.5mm border. Since the border goes all the way around the sticker, meaning 2.5mm on one side and 2.5mm on the other, the sticker I will receive will be 5.5cm in total (“Size” + 2x “Border width”).
Finally, you can select how many stickers of this type you want and click on “Add to cart.”
That’s all there is to it.
☾
☾
☾
-german-
Hier ein kleines Tutorial, wie du Custom Sticker bestellst, ohne dass etwas schief geht.
Zunächst wählst du bei "Material" aus, welches Material du für deinen Sticker möchtest.
Du kannst wählen zwischen:
- Vinyl paper glitter (glossy Vinyl-Papier mit einer glitzernden Deckfolie)
- Vinyl paper glossy (glossy Vinyl-Papier mit einer glänzenden Deckfolie)
- Vinyl paper matte (ein mattes Vinyl-Papier)
- Sticker paper (Das ist das Papier, worauf auch die Sticker Sheets gedruckt werden)
Für dieses Beispiel habe ich mich für einen glänzenden Vinyl Sticker entschieden und wähle daher "Vinyl paper glossy":
Als nächstes musst du herausfinden, auf welchem Sticker Sheet sich dein Motiv befindet. Ich habe mich dazu entschieden, dass ich etwas von dem Sticker Sheet Cafe_01 möchte:
Daher gebe ich in die Zeile "Sticker Sheet" den Name "Cafe_01" ein:
Mein Sticker soll die obere linke Tasse werden. Gebe daher eine möglichst gute Beschreibung ein, damit ich den Sticker auch zuordnen kann. Da es mehrere Tassen auf dem Sticker Sheet gibt, wähle ich bei Motif "Cup top left" zur besseren Unterscheidung:
Als nächstes musst du die Größe eingeben. Damit ist die größte Länge des Stickers gemeint. Das bedeutet wenn ein Sticker mehr breit als hoch ist, ist die Größe die Breite. Ist er mehr hoch als Breit, ist die Höhe gemeint. Hier zwei Beispiele:
Wie du sehen kannst, zählt auch der Rand nicht mit zur Größe.
In meinem Beispiel mit der Tasse ist die Breite größer als die Höhe. Ich möchte, dass meine Tasse 5cm breit ist, also wähle ich bei "Size" die Größe "5.0cm" aus:
Als letzten Schritt musst du die Breite des Randes auswählen. Achte dabei darauf, dass kleinere Sticker mit einem kleinen Rand besser aussehen und größere Sticker mit einem größeren Rand.
Für meinen Beispielsticker sehen 2.5mm Rand sehr gut aus. Daher wähle ich bei "Border width" die Randbreite "2.5mm" aus.
Mein Motiv wird also 5.0cm + 2.5mm Rand. Da der Rand um den ganzen Sticker herum geht, also einmal 2.5mm auf der einen Seite und einmal 2.5mm auf der anderen Seite, ist mein Sticker den ich bekomme insgesamt 5.5cm groß ("Size" + 2x "Border width").
Abschließend kannst du noch auswählen wieviele Sticker du dieses Typs möchtest und klickst auf "Add to cart"
Das war auch schon alles.